Smart Portable Depth Fish Finder with 100 M Wireless Sonar Sensor Echo Sounder Fishfinder for Lake Sea Fishing Saltwater

XJ-01 Portable Color LCD Display Fish Finder Wireless Sonar Transducer Echo Sounders FishfinderFeatures:3. Measuring depth up to 45 meters, wireless receiver range of 100 meters, sonar frequency 125KHZ.4. Level 1-20 sensitivity level, easy to help you detect the position of the fish.Specifications:Material: ABSSize: 135x75x30mm/5.31*2.95*1.18”Net weight: 145gApplicable battery: 4 AAA batteries (Not Included)Display: dot matrix liquid crystal displayDisplay size: 50x45mm/1.96*1.77”Display point number: 128x96Display contrast: 10~100%Backlight: white LED backlightSonar and radio:Depth range: 2-120ft/0.6-45mWireless working range: 100m/328.08ftSonar frequency: 125kHzSonar beam angle: 90 degreesRF: 433.92MHzWorking temperature: -20~70°CPower supply:Host: Lithium battery 3.7V (Not Included)Sensor: polymer battery 3.7V (Not Included)Host battery installation steps:Open the battery cover2. Install 4 x 7 batteries.Ps: Pay attention to the battery indicator in the battery box, please follow the signs inside.Probe charging steps:1. Unscrew the probe to have a charging contact point and insert the charging head.2. When the battery level is lower than 3.2V, the probe battery indicator on the main unit display will flash. Indicates that the fish finder should stop working and start charging.3. If there is water in the main unit or probe, please do not recharge it to avoid adverse consequences.Introduction to sensor usage:Method Two:1. Use the remote control boat to send the wireless sensor to the fishing spot, and attach the sensor, buoy and fishing lure to the end of the fishing rod and put it into the water.2. When the sensor enters the water, it will use the conductivity of the water, turn the sensor on and off, and you can start fishing.3. The sensor injects ultrasonic waves into the water, and the central processing unit of the host receives the signal collected by the sensor through the radio for filtering and analysis.4. The CPU will compile the results and display them on the display.5. The latest data is on the far right of the display and disappears to the far left.6. The bottom of the display shows the underwater structure. The depth of the water, the temperature, and the fish mark are displayed on the display.Note on the use of the sensor:1. When the sensor is working, do not touch the bottom of the sensor with your hand. Otherwise, the test result of the product will be wrong. It will even damage the components inside.2. If you want to take the working sensor out of the water, you can grab the end of the sensor housing and remove it.2. Our products are normally used for a long time, but in the water, due to the fluctuation of the waves, the sensor may be impacted, causing it to hit the reefs and other objects, causing damage to the sensor.3. Due to the physical properties of the ultrasound itself, we recommend not using the product when the water depth is below 0.8 m.Remarks: The rope color is random, usually black, or grey.Notes:Please allow 1-3mm differs due to manual measurement.Due to the different display and different light, the picture may not show the actual color of the item.Thanks for your understanding.

1 X Wireless Sonar Sensor1 X Portable Wireless Receiver1 X Product Instructions1 X Lifting Rope1 X Charging Line

wired fishfinder TL88E:

PRODUCT SPECIFICATION OF TL88E:

Specification:

Backlighting: White LED

Powered by : 4 x AAA batteries (NOT included)

Depth range :100m/328Feet

Sensor Beam Angle :45 degrees

Operating temperature : -18 Celsius to 50 Celsius

1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUEA REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!Shipping cost is bear by both seller and buyer in half.2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aaaaaaa. OR, you may choose to have a replacement.4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

1. 12 months Manufacturer’s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.EXPIRED WARRANTY.You agree to all of the above-listed policies upon ordering on aaaaaaa!

It is impossible to address issues if we do not know about them!