80 Gears Welder Adjustable Portable Handheld Digital Display Mini Spot Welding hine Automatic Trigger for 18650 Battery

Features:
Dual modes are optional, automatic and manual switching mode, can weld mobile phone batteries, support welding all kinds of common nickel-transfer mobile phone batteries plus portable features, it is more convenient to go out to repair mobile phonesDual pulse output, more accurate welding, one-handed operation, one-handed grip, convenient operation and use, one-piece advantage, freeing one hand to hold nickel sheets or fix batteriesHigh-definition LCD display, power lithium battery, maximum output current up to 1200AProduct parameters:Name: Portable Handheld Spot Welding MachineLCD display: power/gear/delay/voltage/modeGear adjustment: 80 gearsBattery Type: Lithium Polymer BatteryBattery capacity: 4000mAhDesign current: 800A(MAX)Input interface: Type-cInput parameters: 5V/2.1ANickel strip thickness: 0.1-0.2mmProduct size: 251*58*25mmWelding method: Visually observe the welding head, hold it at 60° to the horizontal plane, and press the two needles on the surface of the nickel sheet at the same time

Spot Welder Operation Guide
1. After getting the product, please read the manual carefully2. Press and hold the power switch, if there is no operation for 6 minutes, it will automatically shut down3. Support nickel sheet thickness 0.1-0.2mm4. After starting up, the product is in automatic welding mode5. When the welding head detects that it touches the metal, it can output once, and after lifting it up, it can weld the next time6. Make sure that the welding surface of the battery is free from rust, clean and flat7. Make sure the nickel sheet is clean and flat8. Set up the spot welding machine, press properly and forcefully to make the welding needle and the nickel sheet, and the nickel sheet and the battery have good contact, no suspension or poor contact, and good welding can be achieved. Different thicknesses of nickel sheets and different gears do not mean that the greater the power, the better the effect. Users can try which gear is more suitable.9. Use Type-c charger to charge, 5V input (higher voltage input is strictly prohibited) use 5V/2A charger. This product supports using while charging.

Packages
1X spot welder1XType-c charging cable1X nickel sheet 1X 0.12mm nickel-plated nickel sheet