2PCS Heltec LoRa32 V3 868MHz 915MHz Development Board SX1262 0.96 Inch OLED Display BT+WIFI Lora Kit for Arduino IOT Meshtastic

Price range: $89.27 through $97.53

2PCS Heltec LoRa32 V3 868MHz 915MHz Development Board SX1262 0.96 Inch OLED Display BT+WIFI Lora Kit for Arduino IOT Meshtastic

SKU: SHOP-9421370720479 Category:

High-concerned chemical : None

Model Number : FZ2886S

Brand Name : RCmall

Origin : Mainland China

LoRa : 863-928MHZ

Compatible with : Meshtastic

2PCS Heltec LoRa32 V3 868MHz 915MHz Development Board SX1262 0.96 Inch OLED Display BT+WIFI Lora Kit for Arduino IOT Meshtastic
 

Description:
 
WiFi LoRa 32 is a classic IoT dev-board , it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions.
 
It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers.
 
Note:
 
Not include battery;
 
Features:
 
– Microprocessor: ESP32-S3FN8 (Xtensa® 32-bit LX7 dual-core processor, five-stage pipeline rack Structure, frequency up to 240 MHz).
 
– SX1262 LoRa node chip.
 
– Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
 
– Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
 
– Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved (U.FL) interface for LoRa use.
 
– Onboard 0.96-inch 128*64 dot matrix OLED display can be used to display debugging information, battery power, and other information.
 
– Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.
 
– Support the Arduino development environment.
 
– We provide ESP32 + LoRaWAN protocol Arduino® library, this is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol. To make this code run, a unique license is needed.
 
– With good RF circuit design and low-power design.
 
U.FL to SMA Connector Antenna 868MHz for Lora Board Lora32u4 II Wifi Lora32 10cm
 
Description:
Connector type: U.FL
Band definition: 868MHz
Standing wave ratio: <= 1.5
Gain: 2dBi
Maximum power: 10W
Input impedance: 50Ω
 
 
U.FL U.FL to SMA Connector Antenna 915MHz for Lora Board Lora32u4 II Wifi Lora32 10cm
 
Description:
Connector type: U.FL
Band definition: 915MHz
Standing wave ratio: <= 1.5
Gain: 2dBi
Maximum power: 10W
Input impedance: 50Ω
 
 
Package Includes:
2 X ESP32 Lora V3 OLED development board
2 X 868MHz U.FL to SMA Connector Antenna
2 X JST 1.25mm-2P Connector
2.54 pin (no welding)
 
OR
2 X ESP32 Lora V3 OLED development board
2 X 915MHz U.FL to SMA Connector Antenna

2 X JST 1.25mm-2P Connector
2.54 pin (no welding)

 

Document Link :  
https://githubHelTecAutomation/Heltec_ESP32
 




 

color

868MHz V3, 915MHz V3

Reviews

There are no reviews yet.

Be the first to review “2PCS Heltec LoRa32 V3 868MHz 915MHz Development Board SX1262 0.96 Inch OLED Display BT+WIFI Lora Kit for Arduino IOT Meshtastic”

Your email address will not be published. Required fields are marked *